gangster-eq
share
Say hello to my little friend!
Or rather, say hello to my three little gangsters that do your dirty EQ work for you.
1. The Thug
The thug is like Joe Pesci from Casino. He’s the hired hand that does all the dirty work for the family. He doesn’t hesitate to get rid of you any way he can.
Use the thug when you need to cut unwanted frequencies from your mix. He’ll cut anything that’s causing you annoyance: snare rings, muddy bass or hissy guitars.
The thug gets rid of pests without making a mess. He likes it clean and untraceable. Like surgical EQ with a high Q. Just scoop in there and get rid of what’s annoying you.
2. The Godfather
The godfather is like Al Capone. Everybody knows he’s the boss, but the cops can’t prove it. He uses legal businesses as a front for his criminal enterprise. They all know he’s dirty, but they can’t pin it on him.
Think about the godfather when you mask frequencies. Masking is when you boost a higher frequency to hide the problematic frequency below. Say you have a really nasally vocal at 1 kHz or but you can’t cut it without making it sound unnatural. By boosting 3 kHz you mask that nasal sound by covering it up with a more flattering frequency.
Sometimes you need to hide the problematic frequencies. Mask them and none will be the wiser.
3. The Undercover Cop
Think about Tim Roth as Mr. Orange in Reservoir Dogs. When things start getting real ugly, everything’s gotta go. When you get a bunch of low-lives together in a room, there’s gonna be a stand-off and that’s never gonna end well.
Because sometimes you gotta get rid of everything. If you have problems with your low-end, you need to grab that EQ and filter everything out. Make sure that the only things left are the instruments that belong there in the first place.
The undercover cop gets rid of the criminals in the most dangerous way possible: by infiltrating their midst. The same goes for your EQ’ing. Use the filter carefully. Get rid of the scum, but don’t hurt the frequencies around them.
–
Maybe I’ve been watching too many gangster movies between mixing sessions, but these are the three characters that continually resurface.
Similarly, these are the three things to always keep in mind when you’re using EQ. Know when to cut, filter and boost and EQ’ing will be easy for you.
For a great guide on knowing when to use each of these thugs….I mean things, check out Understanding EQ.
The Three Inglorious Gangsters of EQ | Audio Issues
No comments:
Post a Comment